Crestron PRO3快思聪3系主机

    详细描述

    Control Engine
      Core 3 OS™; real-time, preemptive multi-threaded/multitasking kernel; Transaction-Safe Extended FAT file system; supports up to 10 simultaneously running programs
    Memory
      SDRAM 1 GB
      Flash 4 GB
      Memory Card expandable storage up to 32 GB (SD™ memory card not included)
      External Storage up to 1 TB using USB mass storage device (not included)
    Communications
      Ethernet 10/100/1000 Mbps; auto-switching; auto-negotiating; auto-discovery; full/half duplex; industry-standard TCP/IP stack; UDP/IP; CIP; DHCP; SSL; IEEE 802.1X; SNMP; BACnet®/IP[2]; IPv4 or IPv6; Active Directory authentication; IIS v.6.0 Web Server; SMTP e-mail client; installer setup via Crestron Toolbox™or MSIE[3]; supports all e-Control®, Core 3 UI™ XPanel, Crestron Mobile®, Crestron Fusion™ and RoomView® applications
      Control Subnet 10/100/1000 Mbps Ethernet, auto-switching, auto-negotiating, auto-discovery, full/half duplex, DHCP server, DNS Server, port forwarding, Isolation Mode
      Cresnet® Cresnet master mode
      USB Supports USB HID and USB mass storage class devices via rear panel USB 2.0 host port, supports computer console via front panel USB 2.0 device port
      RS-232/422/485 For 2-way device control and monitoring, all ports support RS-232 up to 115.2k baud with software handshaking, two ports also support hardware handshaking, RS-422, and RS-485
      IR/Serial Supports 1-way device control via infrared up to 1.2 MHz or serial TTL/RS-232 (0-5 Volts) up to 115.2k baud
    Connectors & Card Slots
      S1 – S3 (3) 3-Series™ control card expansion slots
      COM 1 – 2 (2) 5-pin 3.5mm detachable terminal blocks;
    Bidirectional RS-232/422/485 ports[4];
    Up to 115.2k baud; hardware and software handshaking support
      COM 3 – 6 (4) 3-pin 3.5mm detachable terminal blocks;
    Bidirectional RS-232 ports[4];
    Up to 115.2k baud; software handshaking support
      IR - SERIAL OUTPUT 1 – 8 (2) 8-pin 3.5mm detachable terminal block comprising (8) IR/Serial output ports;
    IR output up to 1.2 MHz;
    1-way serial TTL/RS-232 (0-5 Volts) up to 115.2k baud
      RELAY OUTPUT 1 – 8 (2) 8-pin 3.5mm detachable terminal blocks comprising (8) normally open, isolated relays;
    Rated 1 Amp, 30 Volts AC/DC;
    MOV arc suppression across contacts
      LAN (1) 8-wire RJ45 jack;
    10/100/1000Base-T Ethernet port[4];
    Connects to the customer's LAN
      CONTROL SUBNET (1) 8-wire RJ45 jack;
    10/100/1000Base-T Ethernet port[4];
    Provides a dedicated local network for Crestron devices
      USB (1) USB Type A female;
    USB 2.0 port for storage devices
      MEMORY (1) memory card slot;
    Accepts up to 32 GB for memory expansion (SD memory card not included)
      I/O 1 – 8 (1) 9-pin 3.5mm detachable terminal block comprising (8) "Versiport" digital input/output or analog input ports (referenced to GND) [4];
    Digital Input: Rated for 0-24 Volts DC, input impedance 20k Ohms, logic threshold >3.125V low/0 and <1.875V high/1;
    Digital Output: 250mA sink from maximum 24 Volts DC, catch diodes for use with "real world" loads;
    Analog Input: Rated for 0-10 Volts DC, protected to 24 Volts DC maximum, input impedance 21k ohms with pull-up resistor disabled;
    Programmable 5 Volts, 2k ohms pull-up resistor per pin
      NET (1) 4-pin 3.5mm detachable terminal block;
    Cresnet master port, outputs power to Cresnet devices[4];
    See "Power Requirements" for additional specifications
      100-240V~2.4A 50/60Hz (1) IEC C14 male chassis plug, main power input;
    Mates with removable power cord, included
      G (1) 6-32 screw, chassis ground lug
      COMPUTER (front) (1) USB Type B female;
    USB 2.0 computer console port (6 ft cable included);
    For setup only
    LCD Display
      Display Type TFT active matrix color LCD
      Size 2.8 inch (72 mm) diagonal
      Resolution 320 x 240 pixels
      Functions Displays configuration menus, control port activity, and other system information
    Controls & Indicators
      PWR (1) Green LED, indicates operating power supplied from AC line
      NET (1) Amber LED, indicates communication with the Cresnet system
      MSG (1) Red LED, indicates control system has generated an error message
      HW-R (1) Recessed pushbutton for hardware reset
      SW-R (1) Recessed pushbutton for software reset
      CNPS FAULT (1) Red LED and (1) pushbutton, LED indicates an excessive Cresnet load detected at the NET port, pushbutton resets the fault indication
      SLOT 1 – 3 (3) Green LEDs, indicate control cards are inserted in the corresponding slots
      Nav Pad (1) 5-way navigation pad for menu navigation and parameter adjustment
      HOME (1) pushbutton, returns to the home menu
      BACK (1) pushbutton, steps menu back one level
      LAN (rear) (2) Bi-color green/amber LEDs, left LED indicates Ethernet link status and connection speed, right LED indicates Ethernet activity
      CONTROL SUBNET (rear) (2) Bi-color green/amber LEDs, left LED indicates Ethernet link status and connection speed, right LED indicates Ethernet activity
    Power Requirements
      Main Power 2.4 Amps @ 100-240 Volts AC, 50/60 Hz
      Available Cresnet Power 75 Watts (3.125 Amps @ 24 Volts DC)
    Environmental
      Temperature 41° to 113°F (5° to 45°C)
      Humidity 10% to 90% RH (non-condensing)
      Heat Dissipation 45 BTU/Hr with no Cresnet devices, no control cards;
    71 BTU/Hr with full Cresnet load, no control cards;
    See individual control card spec sheets for additional specifications
    Enclosure
      Chassis Metal, black finish, vented top and sides
      Faceplate Extruded metal, black finish, polycarbonate label overlay
      Mounting Freestanding or 2U 19-inch rack-mountable (adhesive feet and rack ears included)
    Dimensions
      Height 3.47 in (89 mm) without feet
      Width 17.28 in (439 mm), 19.00 in (483 mm) with rack ears
      Depth 10.13 in (258 mm)
    Weight
      5.0 lb (2.3 kg)